Spring Type

Torsion

Design & manufacture of Torsion springs for Bespoke Applications

Torsion springs can be manufactured from round or square wire and are available in single or double torsion designs, with a variety of leg configurations to suit different applications. Their versatility makes them ideal wherever rotational force is needed. Common uses include agricultural machinery as tines, check valves, and various mechanical and industrial systems requiring torque.

Torsions springs are usually made in either single or double torsions depending on the requirements of the springs. Quite often agricultural machines use double torsions as tines or valves in non return valves. 

If you have another question about our torsion spring manufacture that isn’t covered here please get in touch.

When ordering a torsion spring

Consider the following factors:

1

Wire size

Specify either metric or Imperial measurements or Standard Wire Gauges. We stock all the standard wire sizes and also a large range of non-standard wire sizes for certain designs.

Diameter

Specify the outside diameter of the main part of the spring, or the size of rod that is to go through the centre of the spring (if any). The diameter of the spring is inversely proportional to the rate (strength) of the spring.

Number of coils

The number of coils is inversely proportional to the rate (strength) of a torsion spring. A large number of coils will result in a fairly weak spring. A small number of coils will give a relatively strong spring.

/

Rate

The rate (strength) of the spring depends on the above factors and can easily be calculated. The rate is defined as the torque that has to be applied in order to produce unit deflection and is usually measured in Newton mm per degree (Nmm/°).

Torsion SPring

Leg types

The following are just four examples of leg arrangements for torsion springs. There is no standard type of leg configuration for torsion springs although the cost to manufacture will increase as the complexity increases. The simplest (and cheapest) type are the tangential legs, but we are able to manufacture just about any design you could imagine with multiple bends and/or hooks and loops. Feel free to contact us to discuss any specific requirements.

Axial legs

Tangential legs

Radial legs

One leg radial over centre, the other tangential

What we can do

Gallery